Ready Mixed Concrete | Barking | Erith | Wembley | Chessington

How To Lay Artificial Grass On Concrete

Are you tired of looking at your dull and boring concrete backyard? Do you dream of having a lush, green lawn to relax on during those warm summer days? Well, look no further because, in this article, we will guide you through the process of laying artificial grass on concrete.


With just a few simple steps and some basic tools, you can transform your concrete space into a beautiful oasis.


The first step in laying artificial grass on concrete is preparing the surface. Start by thoroughly cleaning the area to remove any dirt or debris. Next, check for any cracks or uneven areas and repair them using a suitable filler.


Once the surface is smooth and clean, it’s time to measure and cut the artificial grass to fit your space. Lay out the turf over the concrete and use a sharp utility knife to trim it to size. Don’t forget to leave some extra material around the edges for securing later on.


By following these steps, you’ll be well on your way to creating an inviting outdoor space that requires minimal maintenance but offers maximum enjoyment!


Preparing the Concrete Surface


Now, before we get started on transforming your concrete jungle into a lush green oasis, let’s first prepare that solid foundation.


The first step is to thoroughly clean the concrete surface. Remove any debris, dirt, or loose materials by sweeping or using a leaf blower.


Next, use a pressure washer to remove any stubborn stains or dirt that may be stuck on the surface. Make sure to let it dry completely before moving on to the next step.


Once the concrete is clean and dry, it’s time to apply an adhesive primer. This will help the artificial grass adhere to the concrete surface more effectively.


Use a paint roller or brush to apply a thin layer of primer evenly across the entire area. Let it dry according to the manufacturer’s instructions.


Now that you have prepared your concrete surface, let’s move on to measuring and cutting the artificial grass without wasting any time.


Measuring and Cutting the Artificial Grass


In order to accurately install the synthetic turf on a solid surface, it’s essential to carefully measure and cut the material.


Here are some key steps to help you complete this task effectively:


1. Measure twice: Take precise measurements of your concrete area before cutting the artificial grass. Use a tape measure or ruler to ensure accuracy. Remember, it’s better to measure multiple times than make a mistake that could lead to a waste of material.


2. Mark your cuts: Once you’ve measured the area, mark where you need to cut the artificial grass using chalk or a marker. Make sure your lines are straight and clearly visible so that you can follow them accurately during the cutting process.


3. Cut with care: Use a sharp utility knife or carpet cutter to make clean, straight cuts along your marked lines. Apply gentle pressure as you cut through the backing material while being cautious not to damage any surrounding surfaces.


4. Trim excess edges: After laying down the artificial grass, there may be excess edges that need trimming for a neat finish. Carefully trim any overhanging sections using scissors or a knife, ensuring they align seamlessly with the edge of your concrete surface.


With these steps completed, you’re now ready to move on to applying adhesive or securing methods for secure installation of your synthetic turf without any bumps or unevenness in sight!


Applying Adhesive or Securing Methods


To ensure a secure installation, it’s crucial to apply adhesive or use securing methods when installing synthetic turf. Applying adhesive is a common method used to bond the artificial grass to the concrete surface. First, make sure the concrete is clean and dry before applying any adhesive.


Then, use a trowel to spread the adhesive evenly on the concrete. Be sure to follow the manufacturer’s instructions regarding drying time and application techniques.


Another option for securing artificial grass is using nails or staples. If you choose this method, start by placing galvanized nails or staples around the perimeter of the area, about every six inches apart. This will help hold down the edges of the turf securely. Additionally, you can also place nails or staples in strategic spots throughout the middle of the area for added stability.


With this adhesive or securing method in place, your artificial grass will be firmly attached to the concrete surface, ensuring that it stays in place even with heavy foot traffic or weather conditions.


Now that you have secured your turf properly, let’s move on to joining and seaming it together seamlessly without any visible seams between sections of artificial grass.


Joining and Seaming the Artificial Grass


Once you have securely attached your synthetic turf, it’s time to seamlessly join and seam the sections together, creating a flawless and cohesive appearance that will make you feel like you’re walking on a perfectly manicured lawn.


To begin, ensure that the edges of the artificial grass sections are clean and trimmed straight. Lay down adhesive tape along the seams, making sure they overlap slightly to create a strong bond. Press down firmly on the tape to secure it in place.


Next, carefully fold back one section of artificial grass so that the adhesive tape is exposed. Apply a layer of turf glue or adhesive evenly along the length of the tape using a trowel or brush. Gently fold back the other section of artificial grass onto the glued area, aligning the edges as closely as possible. Press down firmly along the seam to ensure proper adhesion.


Transitioning into adding finishing touches and maintenance tips, remember that once your artificial grass is joined and seamed together, it’s important to brush up any fibers that may have been flattened during installation. This will help achieve an even appearance and prevent matting over time.


Additionally, regularly remove debris such as leaves or pet waste from your synthetic lawn to maintain its cleanliness and longevity.


Adding Finishing Touches and Maintenance Tips


For a pristine and long-lasting synthetic lawn, don’t forget to brush up any flattened fibres and regularly remove debris from your low-maintenance oasis.


This will help maintain the natural look and feel of your artificial grass over time.


Use a stiff brush or broom with bristles that aren’t too hard to avoid damaging the fibres.


Brushing against the grain will help to lift the flattened fibres and restore their upright position, giving your lawn a fresh and vibrant appearance.


In addition to brushing, it’s important to regularly remove any debris that may accumulate on your artificial grass.


Leaves, twigs, dirt, and other small objects can easily get trapped in between the blades of grass, causing them to become matted down or even create areas of unevenness.


To prevent this from happening, simply use a rake or leaf blower to gently remove any loose debris from your lawn.


Be careful not to apply excessive force or pressure as you don’t want to damage the grass fibres or pull them out from their backing.


By following these maintenance tips, you can ensure that your artificial grass stays in top condition for many years to come.


Remember to periodically brush up any flattened fibres and remove debris from your lawn’s surface.


With proper care and attention, your low-maintenance oasis will continue looking lush and green all year round!


Frequently Asked Questions


How long does it typically take for the adhesive to dry when installing artificial grass on concrete?


Typically, the adhesive used for installing artificial grass on concrete takes about 24 to 48 hours to dry completely. It’s important to give it enough time to ensure a strong bond and proper installation.


Can artificial grass be installed on uneven concrete surfaces?


Yes, artificial grass can be installed on uneven concrete surfaces. First, ensure the concrete is clean and level. Use a self-levelling compound if needed. Lay a geotextile membrane, then roll out and secure the artificial grass onto the surface using adhesive or tape.


Is it necessary to add a layer of sand or rubber infill on top of the artificial grass on concrete?


No, it is not necessary to add a layer of sand or rubber infill on top of the artificial grass on concrete. The concrete acts as a solid base and provides sufficient support for the grass without the need for additional infill materials.


What is the best method to remove stains or spills from artificial grass on concrete?


To remove stains or spills from artificial grass on concrete, start by blotting up any excess liquid. Mix a mild soap with warm water and scrub the affected area using a soft-bristle brush. Rinse thoroughly with clean water and let it air dry.


Are there any special considerations or precautions to take when installing artificial grass on concrete in extreme weather conditions, such as high temperatures or heavy rain?


In extreme weather conditions like high temperatures or heavy rain, you should take special precautions when installing artificial grass on concrete. Ensure proper drainage, use appropriate adhesives, and consider using a cooling infill to reduce heat buildup.




In conclusion, laying artificial grass on concrete is a great way to transform your outdoor space into a lush and low-maintenance area. By following the steps outlined in this article, you can ensure that the process is smooth and successful.


Firstly, it’s important to properly prepare the concrete surface by cleaning it thoroughly and filling any cracks or holes. This will provide a smooth and even base for your artificial grass.


Next, measure and cut the grass according to your desired dimensions, making sure to leave some extra material for trimming later on.


Once you have prepared the surface and cut the grass, it’s time to apply adhesive or use securing methods such as pegs or nails to keep the grass in place. Make sure to follow the manufacturer’s instructions for applying adhesive and allow sufficient time for it to dry.


After securing the grass, you can join multiple pieces together using seam tape or adhesive. This will create a seamless look and ensure that your artificial lawn appears natural.


Finally, add finishing touches such as brushing up the blades of grass with a broom or adding infill material if desired.


Maintaining your artificial grass is relatively easy – simply brush away any debris regularly and rinse with water occasionally to keep it clean. Avoid using harsh chemicals or excessive force when cleaning.


Overall, laying artificial grass on concrete can be a rewarding project that brings beauty and functionality to your outdoor space. With proper preparation, measurement, securing techniques, joining methods, and maintenance tips, you’ll be able to enjoy a vibrant green lawn all year round without any of the hassles of traditional turf maintenance.


Share the Post:
Share on facebook
Share on twitter
Share on linkedin

Related Posts